Removed a lot of trailing spaces

src/02_build_kernel.sh

@@ -39,7 +39,7 @@ fi
 
 if [ "$USE_PREDEFINED_KERNEL_CONFIG" = "true" ] ; then
   # Use predefined configuration file for the kernel.
-  echo "Using config file $SRC_DIR/minimal_config/kernel.config"  
+  echo "Using config file $SRC_DIR/minimal_config/kernel.config"
   cp -f $SRC_DIR/minimal_config/kernel.config .config
 else
   # Create default configuration file for the kernel.
@@ -51,16 +51,16 @@ else
 
   # Enable overlay support, e.g. merge ro and rw directories (3.18+).
   sed -i "s/.*CONFIG_OVERLAY_FS.*/CONFIG_OVERLAY_FS=y/" .config
-  
+
   # Enable overlayfs redirection (4.10+).
   echo "CONFIG_OVERLAY_FS_REDIRECT_DIR=y" >> .config
 
   # Turn on inodes index feature by default (4.13+).
   echo "CONFIG_OVERLAY_FS_INDEX=y" >> .config
-  
+
   # Step 1 - disable all active kernel compression options (should be only one).
-  sed -i "s/.*\\(CONFIG_KERNEL_.*\\)=y/\\#\\ \\1 is not set/" .config  
+  sed -i "s/.*\\(CONFIG_KERNEL_.*\\)=y/\\#\\ \\1 is not set/" .config
-  
+
   # Step 2 - enable the 'xz' compression option.
   sed -i "s/.*CONFIG_KERNEL_XZ.*/CONFIG_KERNEL_XZ=y/" .config
 
@@ -77,13 +77,13 @@ else
     sed -i "s/.*CONFIG_LOGO_LINUX_CLUT224.*/\\# CONFIG_LOGO_LINUX_CLUT224 is not set/" .config
     echo "Boot logo is disabled."
   fi
-  
+
   # Disable debug symbols in kernel => smaller kernel binary.
   sed -i "s/^CONFIG_DEBUG_KERNEL.*/\\# CONFIG_DEBUG_KERNEL is not set/" .config
 
   # Enable the EFI stub
   sed -i "s/.*CONFIG_EFI_STUB.*/CONFIG_EFI_STUB=y/" .config
-  
+
   # Disable Apple Properties (Useful for Macs but useless in general)
   echo "CONFIG_APPLE_PROPERTIES=n" >> .config
 

src/07_build_busybox.sh

@@ -38,13 +38,13 @@ fi
 
 if [ "$USE_PREDEFINED_BUSYBOX_CONFIG" = "true" ] ; then
   # Use predefined configuration file for Busybox.
-  echo "Using config file $SRC_DIR/minimal_config/busybox.config"  
+  echo "Using config file $SRC_DIR/minimal_config/busybox.config"
   cp -f $SRC_DIR/minimal_config/busybox.config .config
 else
   # Create default configuration file.
-  echo "Generating default BusyBox configuration..."  
+  echo "Generating default BusyBox configuration..."
   make defconfig -j $NUM_JOBS
-  
+
   # The 'inetd' applet fails to compile because we use the glibc installation area as
   # main pointer to the kernel headers (see 05_prepare_glibc.sh) and some headers are
   # not resolved. The easiest solution is to ignore this particular applet. 

src/09_generate_rootfs.sh

@@ -24,7 +24,7 @@ cp -r src/minimal_rootfs/* rootfs
 
 cd rootfs
 
-# Remove 'linuxrc' which is used when we boot in 'RAM disk' mode. 
+# Remove 'linuxrc' which is used when we boot in 'RAM disk' mode.
 rm -f linuxrc
 
 # Read the 'COPY_SOURCE_ROOTFS' property from '.config'

src/12_generate_iso.sh

@@ -2,14 +2,14 @@
 
 # TODO - this shell script file needs serios refactoring since right now it does
 # too many things:
-# 
+#
 # 1) Deal with 'src' copy.
 # 2) Generate the 'overlay' software bundles.
 # 3) Create proper overlay structure.
 # 4) Prepare the actual ISO structure.
 # 5) Generate the actual ISO image.
 #
-# Probably it's best to create separate shell scripts for each functionality. 
+# Probably it's best to create separate shell scripts for each functionality.
 
 echo "*** GENERATE ISO BEGIN ***"
 
@@ -76,51 +76,51 @@ if [ "$OVERLAY_TYPE" = "sparse" -a "$(id -u)" = "0" ] ; then
   # script is executed with root permissions or otherwise this block is skipped.
   # All files and folders located in the folder 'minimal_overlay' will be merged
   # with the root folder on boot.
-  
+
   echo "Using sparse file for overlay."
-  
+
   # This is the BusyBox executable that we have already generated.
-  BUSYBOX=../rootfs/bin/busybox  
+  BUSYBOX=../rootfs/bin/busybox
-  
+
   # Create sparse image file with 1MB size. Note that this increases the ISO
   # image size.
   $BUSYBOX truncate -s 1M minimal.img
-  
+
   # Find available loop device.
   LOOP_DEVICE=$($BUSYBOX losetup -f)
-  
+
   # Associate the available loop device with the sparse image file.
   $BUSYBOX losetup $LOOP_DEVICE minimal.img
-  
+
-  # Format the sparse image file with Ext2 file system. 
+  # Format the sparse image file with Ext2 file system.
   $BUSYBOX mkfs.ext2 $LOOP_DEVICE
-  
+
   # Mount the sparse file in folder 'sparse".
   mkdir sparse
   $BUSYBOX mount minimal.img sparse
-  
+
   # Create the overlay folders.
   mkdir -p sparse/rootfs
-  mkdir -p sparse/work  
+  mkdir -p sparse/work
-  
+
   # Copy the overlay content.
   cp -r $SRC_DIR/work/src/minimal_overlay/rootfs/* sparse/rootfs/
-  
+
   # Unmount the sparse file and delete the temporary folder.
   $BUSYBOX umount sparse
   rm -rf sparse
-  
+
   # Detach the loop device since we no longer need it.
   $BUSYBOX losetup -d $LOOP_DEVICE
 elif [ "$OVERLAY_TYPE" = "folder" ] ; then
   # Use normal folder structure for overlay. All files and folders located in
   # the folder 'minimal_overlay' will be merged with the root folder on boot.
-  
+
   echo "Using folder structure for overlay."
-  
+
   mkdir -p minimal/rootfs
-  mkdir -p minimal/work  
+  mkdir -p minimal/work
-  
+
   cp -rf $SRC_DIR/work/src/minimal_overlay/rootfs/* \
     minimal/rootfs/
 else

src/generate_hdd.sh

@@ -12,36 +12,36 @@ elif [ "$1" = "-f" -o "$1" = "--folder" ] ; then
     echo "Using option '-f' (or '--folder') requires root permissions."
     exit 1
   fi
-  
+
   rm -f hdd.img
   truncate -s 20M hdd.img
   echo "Created new hard disk image file 'hdd.img' with 20MB size."
-  
+
   LOOP_DEVICE=$(losetup -f)
   losetup $LOOP_DEVICE hdd.img
   echo "Attached hard disk image file to loop device."
-  
+
   mkfs.ext2 $LOOP_DEVICE
   echo "Hard disk image file has been formatted with Ext2 filesystem."
-  
+
   mkdir folder
   mount hdd.img folder
   echo "Mounted hard disk image file to temporary folder."
-  
+
   mkdir -p folder/minimal/rootfs
   mkdir -p folder/minimal/work
   echo "Overlay structure has been created."
-  
+
-  echo "This file is on external hard disk." > folder/minimal/rootfs/overlay.txt 
+  echo "This file is on external hard disk." > folder/minimal/rootfs/overlay.txt
   echo "Created sample text file."
 
   umount folder
   rm -rf folder
   echo "Unmounted hard disk image file."
-  
+
   losetup -d $LOOP_DEVICE
   echo "Detached hard disk image file from loop device."
-  
+
   chown $(logname) hdd.img
   echo "Applied original ownership to hard disk image file."
 elif [ "$1" = "-s" -o "$1" = "--sparse" ] ; then
@@ -49,22 +49,22 @@ elif [ "$1" = "-s" -o "$1" = "--sparse" ] ; then
     echo "Using option '-s' (or '--sparse') requires root permissions."
     exit 1
   fi
-  
+
   rm -f hdd.img
   truncate -s 20M hdd.img
   echo "Created new hard disk image file 'hdd.img' with 20MB size."
-  
+
   LOOP_DEVICE_HDD=$(losetup -f)
   losetup $LOOP_DEVICE_HDD hdd.img
   echo "Attached hard disk image file to loop device."
-  
+
   mkfs.vfat $LOOP_DEVICE_HDD
   echo "Hard disk image file has been formatted with FAT filesystem."
-  
+
   mkdir sparse
   mount hdd.img sparse
   echo "Mounted hard disk image file to temporary folder."
-  
+
   rm -f sparse/minimal.img
   truncate -s 1M sparse/minimal.img
   echo "Created new overlay image file with 1MB size."
@@ -79,11 +79,11 @@ elif [ "$1" = "-s" -o "$1" = "--sparse" ] ; then
   mkdir ovl
   mount sparse/minimal.img ovl
   echo "Mounted overlay image file to temporary folder."
-  
+
   mkdir -p ovl/rootfs
   mkdir -p ovl/work
   echo "Overlay structure has been created."
-  
+
   echo "Create sample text file."
   echo "This file is on external hard disk." > ovl/rootfs/overlay.txt
 
@@ -99,15 +99,15 @@ elif [ "$1" = "-s" -o "$1" = "--sparse" ] ; then
   sleep 1
   echo "Overlay image file has been detached from loop device."
 
-  umount sparse  
+  umount sparse
   sleep 1
   rm -rf sparse
   echo "Unmounted hard disk image file."
-  
+
   losetup -d $LOOP_DEVICE_HDD
   sleep 1
   echo "Hard disk image file has been detached from loop device."
-  
+
   chown $(logname) hdd.img
   echo "Applied original ownership to hard disk image file."
 elif [ "$1" = "-h" -o "$1" = "--help" ] ; then
@@ -115,7 +115,7 @@ elif [ "$1" = "-h" -o "$1" = "--help" ] ; then
   Usage: $0 [OPTION]
   This utility generates 20MB sparse file 'hdd.img' which can be used as QEMU
   disk image where all filesystem changes from the live session are persisted.
-  
+
   -e, --empty     Create empty sparse image file which is not formatted.
   -f, --folder    Create sparse image file formatted with Ext2 filesystem which
                   contains compatible overlay folder structure.

src/minimal_overlay/overlay_clean.sh

@@ -25,7 +25,7 @@ for dir in $(ls -d */ 2>/dev/null) ; do
   cp -r $dir $SRC_DIR/../work/src/minimal_overlay/rootfs
   echo "Default overlay folder '$dir' has been prepared."
 done
- 
+
 echo "Ready to continue with the overlay software."
 
 cd $SRC_DIR