#!/bin/sh

set -e

# Load common properties and functions in the current script.
. ./common.sh

echo "*** BUILD KERNEL BEGIN ***"

# Change to the kernel source directory which ls finds, e.g. 'linux-4.4.6'.
cd `ls -d $WORK_DIR/kernel/linux-*`

# Cleans up the kernel sources, including configuration files.
echo "Preparing kernel work area."
make mrproper -j $NUM_JOBS

# Read the 'USE_PREDEFINED_KERNEL_CONFIG' property from '.config'
USE_PREDEFINED_KERNEL_CONFIG=`read_property USE_PREDEFINED_KERNEL_CONFIG`

if [ "$USE_PREDEFINED_KERNEL_CONFIG" = "true" -a ! -f $SRC_DIR/minimal_config/kernel.config ] ; then
  echo "Config file '$SRC_DIR/minimal_config/kernel.config' does not exist."
  USE_PREDEFINED_KERNEL_CONFIG=false
fi

if [ "$USE_PREDEFINED_KERNEL_CONFIG" = "true" ] ; then
  # Use predefined configuration file for the kernel.
  echo "Using config file '$SRC_DIR/minimal_config/kernel.config'."
  cp -f $SRC_DIR/minimal_config/kernel.config .config
else
  # Create default configuration file for the kernel.
  make defconfig -j $NUM_JOBS
  echo "Generated default kernel configuration."

  # Changes the name of the system to 'minimal'.
  sed -i "s/.*CONFIG_DEFAULT_HOSTNAME.*/CONFIG_DEFAULT_HOSTNAME=\"minimal\"/" .config

  # Enable overlay support, e.g. merge ro and rw directories (3.18+).
  sed -i "s/.*CONFIG_OVERLAY_FS.*/CONFIG_OVERLAY_FS=y/" .config

  # Enable overlayfs redirection (4.10+).
  echo "CONFIG_OVERLAY_FS_REDIRECT_DIR=y" >> .config

  # Turn on inodes index feature by default (4.13+).
  echo "CONFIG_OVERLAY_FS_INDEX=y" >> .config

  # Follow redirects even if redirects are turned off (4.15+).
  echo "CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y" >> .config

  # Turn on NFS export feature by default (4.16+).
  echo "CONFIG_OVERLAY_FS_NFS_EXPORT=y" >> .config

  # Auto enable inode number mapping (4.17+).
  echo "CONFIG_OVERLAY_FS_XINO_AUTO=y" >> .config

  # Тurn on metadata only copy up feature by default (4.19+).
  echo "CONFIG_OVERLAY_FS_METACOPY=y" >> .config

  # Step 1 - disable all active kernel compression options (should be only one).
  sed -i "s/.*\\(CONFIG_KERNEL_.*\\)=y/\\#\\ \\1 is not set/" .config

  # Step 2 - enable the 'xz' compression option.
  sed -i "s/.*CONFIG_KERNEL_XZ.*/CONFIG_KERNEL_XZ=y/" .config

  # Enable the VESA framebuffer for graphics support.
  sed -i "s/.*CONFIG_FB_VESA.*/CONFIG_FB_VESA=y/" .config

  # Read the 'USE_BOOT_LOGO' property from '.config'
  USE_BOOT_LOGO=`read_property USE_BOOT_LOGO`

  if [ "$USE_BOOT_LOGO" = "true" ] ; then
    sed -i "s/.*CONFIG_LOGO_LINUX_CLUT224.*/CONFIG_LOGO_LINUX_CLUT224=y/" .config
    echo "Boot logo is enabled."
  else
    sed -i "s/.*CONFIG_LOGO_LINUX_CLUT224.*/\\# CONFIG_LOGO_LINUX_CLUT224 is not set/" .config
    echo "Boot logo is disabled."
  fi

  # Disable debug symbols in kernel => smaller kernel binary.
  sed -i "s/^CONFIG_DEBUG_KERNEL.*/\\# CONFIG_DEBUG_KERNEL is not set/" .config

  # Enable the EFI stub
  sed -i "s/.*CONFIG_EFI_STUB.*/CONFIG_EFI_STUB=y/" .config

  # Request that the firmware clear the contents of RAM after reboot (4.14+).
  echo "CONFIG_RESET_ATTACK_MITIGATION=y" >> .config

  # Disable Apple Properties (Useful for Macs but useless in general)
  echo "CONFIG_APPLE_PROPERTIES=n" >> .config

  # Check if we are building 64-bit kernel.
  if [ "`grep "CONFIG_X86_64=y" .config`" = "CONFIG_X86_64=y" ] ; then
    # Enable the mixed EFI mode when building 64-bit kernel.
    echo "CONFIG_EFI_MIXED=y" >> .config
  fi
fi

# Compile the kernel with optimization for 'parallel jobs' = 'number of processors'.
# Good explanation of the different kernels:
# http://unix.stackexchange.com/questions/5518/what-is-the-difference-between-the-following-kernel-makefile-terms-vmlinux-vmlinux
echo "Building kernel."
make \
  CFLAGS="$CFLAGS" \
  bzImage -j $NUM_JOBS

# Prepare the kernel install area.
echo "Removing old kernel artifacts. This may take a while."
rm -rf $KERNEL_INSTALLED
mkdir $KERNEL_INSTALLED

# Install the kernel file.
cp arch/x86/boot/bzImage \
  $KERNEL_INSTALLED/kernel

# Install kernel headers which are used later when we build and configure the
# GNU C library (glibc).
echo "Generating kernel headers."
make \
  INSTALL_HDR_PATH=$KERNEL_INSTALLED \
  headers_install -j $NUM_JOBS

cd $SRC_DIR

echo "*** BUILD KERNEL END ***"